i need help with this pls help
Hi @victor_storberget - the easiest way is to download our Raspberry Pi image, then burn this to an SD card. We have instructions available at the link below. NOTE: You must be using an RPi 3, the older RPi devices are not fast enough for Mycroft. Do let us know how you go.
Kind regards, Kathy
# Welcome
## Picroft 0.9.1
The Picroft project is an enclosure for a stock Raspberry Pi connected to a speaker and basic USB microphone. This is built around a Raspbian Jessie Lite installation. The entire project is available as a pre-built micro-SD image ready to be burned and placed into a Raspberry Pi. You can download the pre-built image here:
[![Download img](https://github.com/MycroftAI/enclosure-picroft/raw/master/microsd-icon.png "Download img") Picroft 0.9 image](https://mycroft.ai/to/picroft-image)
SHA256 checksum for the `raspbian_Picroft_2018-01-19_v0.9.1.zip` image:
`d3041e41e7b6f1ca4f4b9ad3b4a665702b9dc32b285884d9bfdad8aefb9b788d`
## Requirements
* Raspberry Pi 3 (Older versions do not have sufficient processing power, and if they work they will be very slow)
* MicroSD Card (8 GB or larger)
* Any analog speaker
* USB Microphone. Tested with CM108-based microphones.
## Installation
[Official Raspberry Pi Image Installation Instuctions](https://www.raspberrypi.org/documentation/installation/installing-images/)
This file has been truncated. show original