ReSpeaker 4 mic LEDs

Archive - Mycroft Project Picroft
1

Hello there,

how can I use the LEDs on the ReSpeaker?

Sorry for my bad english.

2

I think this is the wrong forum for your question, nevertheless here is some more information for you (that I have googled in less than 60 seconds):
http://wiki.seeedstudio.com/ReSpeaker_4_Mic_Array_for_Raspberry_Pi/
scroll down to section “Play with APA102 LEDs” - there you find instructions how to run a demo script for the LEDs

3

I wouldn’t ask if I googled before. I found this guide too, but it don’t work for me.

4

The demo worked for me and makes a good starting point of what i wanted to do.

Create an enclosure section like the mark 1 and connect to the message bus connect yhe different functions to actions of mycroft.

It is in my to do list, like so many other things…

5

Thank you, for your quick response. I will try it as soon as possible.

I have the same struggle :smiley:

1 Like
6

Howdy @hagen and @j1nx

The first demo worked for me, but the second failed.
Has either of you had any luck using the LEDs with mycroft?

Thanks.

Nathan

7

It has been a while since I looked at it, but as far as I remember I only quickly ran the “pixels_demo.py” and that’s it.

Just placed it onto my to long ToDo list to create an enclosure for it such that we have some sort of blue-isch LED light structure which is similar as what the MyCroft logo does under KDE plasma.

Haven’t looked back at it since then, as the task ended up on page 7 on the todo list or something :smiley:

8

First early version available;

2 Likes